We offer an extensive selection of charging and gauging equipment for our accumulators. We are also able to help charge your in-field accumulators through our network of distributors or with our on-site service and repair program. Please contact us for a quote on charging equipment or to set up a service appointment.
|3000 PSI Charging Kits|
|Kit with 3000 PSI Gauge (Items 1a-11)||AI-CG3-3KT-SS|
|Kit with 6000 PSI Gauge (Items 1b-11)||AI-CG6-6KT-SS|
AI-CG3-3KT-SS and AI-CG3-6KT-SS are rated to 3000 PSI maximum working pressure. Connects to a maximum 3000 PSI nitrogen tank with a CGA 580 connection.
Do not use on accumulators with a pressure higher than 3000 PSI. It is highly recommended that a N2 gas regulator be used while charging any accumulator. Use dry nitrogen gas (N2) only.
|Component Parts List|
|1a||3000 PSI Gauge||AI-CG3-001|
|1b||6000 PSI Gauge||AI-CG6-001|
|7||3000 PSI Hose||AI-CG-007-SS|
|TR Adapter (Connects to 11)||AI-TR-015|
|Gauging & Head Assembly, 3000 PSI Gauge (Items 1a-4, 9, 11)||AI-CG3-313|
|Gauging & Head Assembly, 6000 PSI Gauge (Items 1a-4, 9, 11)||AI-CG6-613|
|Hose Assembly (Items 5-8, 10)||AI-CG-017-SS|
|Valve Core (Internal)||AI-S-304|
|Full Assembly Component Parts List|
|Complete Kit (Items 1-8)||AI-CG6-6KT-SS
|1||Gauge, 6000 PSI||AI-CG6-501-SS|
|5||Hose (8 ft.)||AI-CG6-507-SS|
|6||Cylinder Valve Tube||AI-CG6-508-SS|
|8||Cylinder Valve Nut||AI-CG6-511-SS|
|Hose Assembly (Items 2, 4, 5)||AI-CG6-517-SS|
|Gauging and Head Assembly (Items 1, 3, 4, 6, 7, 8)||AI-CG6-613-SS|
AI-CG6-6KT-SS is rated to 6000 PSI maximum working pressure. Do not use on accumulators with a pressure higher than 6000 PSI. Connects to a maximum 6000 PSI nitrogen tank with a CGA 677 connection. It is highly recommended that a N2 gas regulator be used while charging any accumulator. Use dry nitrogen gas (N2) only.
|Component Parts List|
|10K C&G Assembly (Items 1-8)||AI-CG10-10KT-SS|
|1||Gauge (0-10000 PSI, liquid filled)||AI-CG10-001-L-SS|
|7||Air Chuck Adapter||AI-ADP-A-NPT2F-MH6M-15-SS|
AI-CG10-10KT-SS is rated to 10000 PSI maximum working pressure. Do not use on accumulators with a pressure higher than 10000 PSI. It is highly recommended that a N2 gas regulator be used while charging any accumulator. Use dry nitrogen gas (N2) only.
Extended versions available for Top Repairable bladder accumulators and piston accumulators.
|AI-PM3-3KT-L-SS Components List 1 GAL - 40 GAL|
|5||Pressure Monitor Block, Deluxe, 3000 PSI||AI-PM3-003-D-SS|
|6||Gauge, 3000 PSI, Liquid Filled||AI-CG3-001-1-L-SS|
|AI-PM6-6KT-L-SS Components List 1 QT - 15 GAL|
|3||High Pressure Gas Valve||AI-S6-309|
|5||Pressure Monitor Block, Deluxe, 6000 PSI||AI-PM6-003-D-SS|
|6||Gauge, 6000 PSI, Liquid Filled||AI-CG6-001-1-L-SS|
We recommend a nitrogen regulator to anyone precharging an accumulator. The regulator ensures that nitrogen is added to your accumulator at a safe rate, which protects the bladder from damage as well as keeps the air temperature inside your accumulator from rising during compression. Use of a nitrogen regulator is an essential safety factor.
We stock several different types of nitrogen regulators compatible with our accumulators. Please contact us for more information.
Most hydraulic accumulators need to be precharged with dry nitrogen gas before operation. Accumulators, Inc. nitrogen gas boosters are designed to boost gas pressure directly from nitrogen cylinders to outlet pressures as high as 10000 psi. Our unit ensures maximum outlet pressure will be maintained even if the pressure in the nitrogen cylinders drops as low as 500 psi.
Our booster is a driven by a typical industrial-style shop-air compressor, typically between 70 and 100 psi. If compressed air is not available, the booster can also be driven directly by the nitrogen cylinders. In the shop-air drive mode, non-contaminated outlet gas is assured through complete dual-vented separation from the drive section. The high pressure section of the booster is cooled by the drive exhaust gas and requires no lubrication. Valves and gauges are stainless steel and are line-mounted to the booster, which features a painted, aluminum tube frame with carry handles.
For assistance determining the appropriate accumulator size for your application, please contact us.
|PART NUMBER||OUTLET PRESSURE RANGE|