Accumulators, Inc. offers several standard accumulator sizes along with a wide variety of coatings, fittings and accessories. In addition to our standard sizes, we can provide customized fittings and coatings to match your application.
Below is a list of our standard sizes and components. If the size you require is not listed, please contact us for assistance. To receive a quote for any of our products, use our RFQ Tool or contact us. For assistance determining the appropriate accumulator size for your application, use our accumulator sizing tool or contact us.
| Size | 500 PSI | 2000 PSI | 3000 PSI | 5000 PSI | 6000 PSI | 10000 PSI |
|---|---|---|---|---|---|---|
| 1 Pint | ✔ | |||||
| 1 Quart | ✔ | ✔ | ✔ | |||
| 1 Gallon | ✔ | ✔ | ✔ | |||
| 1.5 Gallon | ✔ | |||||
| 2.5 Gallon | ✔ | ✔ | ✔ | ✔ | ||
| 5 Gallon | ✔ | ✔ | ✔ | ✔ | ||
| 10 Gallon | ✔ | ✔ | ✔ | ✔ | ||
| 11 Gallon | ✔ | ✔ | ||||
| 15 Gallon | ✔ | ✔ | ✔ | ✔ | ||
| 40 Gallon | ✔ | |||||
| 80 Gallon | ✔ | |||||
| 120 Gallon | ✔ |
Notes:
All above sizes are ASME, Section VIII, Div. I, “U” Stamped
All 2000 PSI Accumulators are 316 Stainless Steel
For pressures and sizes not shown as standard, please see our offering of piston accumulators or contact us
- Buna-Nitrile (Standard)
- Low-Temp Buna-Nitrile (-40F)
- Extreme Low-Temp Buna-Nitrile (-80F)
- Butyl
- Fluorocarbon
- EPR
- Neoprene
- Hydrin/ECO
| Fluid Port Sizes | 1 Quart | 1 Gallon | 2.5-15 Gallon | 40 Gallon | 80 Gallon | 120 Gallon |
|---|---|---|---|---|---|---|
| 3/4" NPT Female | ✔ | |||||
| 1 1/16"-12 SAE Female (-12) | ✔ | |||||
| 3/4" SAE Split Flange | ✔ | |||||
| 1 1/4" NPT Female | ✔ | ✔ | ||||
| 1 5/16"-12 SAE Female (-16) | ✔ | |||||
| 1 5/8"-12 SAE Female (-20) | ✔ | |||||
| 1 1/2" Code 61 SAE Split Flange | ✔ | |||||
| 1 1/2" Code 62 SAE Split Flange | ✔ | |||||
| 1 7/8"-12 SAE Female (-24) | ✔ | |||||
| 2" NPT Female | ✔ | |||||
| 2" Code 61 SAE Split Flange | ✔ | |||||
| 4" MPT High Flow | ✔ | |||||
| 3"-8 NPT Female | ✔ | |||||
| 3" Code 61 SAE Split Flange | ✔ | |||||
| 4" 300# Raised-Face Flange | ✔ | |||||
| 6" 300# Raised-Face Flange | ✔ | |||||
| 1” Medium Pressure (10k only) | ✔ |
Note: Many other connections available
- Chrome-Moly Steel, SA372
- 316 Stainless Steel (up to 2000 psi)
- Lightweight carbon-fiber wrapped shells
- Electroless Nickel Plated Chrome-Moly Steel
- Chrome-Moly Steel with 3-Coat Marine Epoxy OD, Phenolic ID
- We can comply with your application’s strict paint/coating specifications